This learning space is equipped with an Extron digital touchscreen A/V control panel interface.

1. To start the A/V system, select a mode by touching the lectern's control panel interface screen.
2. Remember to shut down the system when finished.

If you encounter an unresponsive A/V control panel interface:

1. Check that the projector front mute or the projector rear mute button is not selected. 
2. Check that the monitors are on.
3. Restart the interface.

This learning space is equipped with a single lectern computer monitor and dual projectors/screens.

1. By default, A/V system will use PC, the room computer's primary monitor, for both Front Display and Rear Display
2. To view or project an alternate source, such as PC EXTEND, MAC, MAC EXTEND, DOC CAM, BLU-RAY, SOLSTICE, or HDMI, select accordingly on A/V Control Panel Interface then select Front Display or Rear Display to project on the screen as needed.

If you encounter an unresponsive projector: 

1. Check that the projector front mute or the projector rear mute button is not selected. 

This learning space is equipped with n Windows Desktop workstation computer and an Apple Macintosh Mini workstation computer.

1. By default, the A/V system will use PC, the lectern computer's monitor as its source. 
2. To use the Mac system, press mac on the A/V control panel interface.
3. For either the Windows or Macintosh system, press the space bar on the computer keyboard to view the main display.
4. Log in with your HawkID and password.
5. Log out when finished.

If you can't access the computer’s login menu:

1. Check that the projector front mute or the projector rear mute button is not selected. 
2. Check that the computer monitor is on.
3. Check that the HDMI/display port cable is connected to the back of the monitor.
4. Restart the computer.

This learning space is equipped with a wireless lavaliere microphone. Wireless microphones provide audio input for the lectern computer and its Zoom, UICapture (Panopto), and Skype applications.

If you encounter a wireless microphone that doesn't work:

1. Check the microphone display for power and mute.
2. Check the microphone display for battery replacement. Rechargeable batteries are typically located on the battery charger. Alkaline batteries are typically located in the microphone drawer.
3. If using rechargeable battery supplies, remember to replace the depleted batteries on the charger.
4. If nearing the end of the battery supplies, contact the ITS Help Desk for resupply.
5. Select Echo Cancelling Speakerphone (Extron MediaPort200) as the audio source device in the lectern computer's Zoom, UICapture (Panopto), or Skype applications.

This learning space is equipped with wired ceiling microphones to provide audio input for the lectern computer and its Zoom, UICapture (Panopto), and Skype applications.

If you encounter ceiling microphones that don't work:

1. Select speakerphone (2-Extron MediaPort200 Speakerphone) as the audio input or source device in the lectern computer's Zoom, UICapture (Panopto), or Skype applications. 

This learning space is equipped with wall-mounted PTZ cameras, forward and rear mounted, that can be re-positioned with the A/V control panel interface. 

1. Press the room cameras button on the A/V control panel interface to access options, including repositioning.

If you find a USB camera that doesn't work:

1. Select Extron MediaPort200 as the camera input or source in the lectern computer's Zoom, UICapture (Panopto), or Skype applications.

This learning space is equipped with in-room audio output from the lectern computer through ceiling-mounted speakers that are controlled with the A/V control panel interface.

1. The A/V control panel interface has a touchscreen volume slider. Drag the slider up to increase the volume, and drag the slider down to decrease the volume.
2. Press the audio mute button on the A/V control panel interface to mute audio.

If you can't produce in-room audio from lectern computer with the A/V system on and not muted:

1. Check that the computer, device, application, or website audio is not muted. 
2. Increase the audio level of the computer, device, application, website, or A/V control panel interface. 
3. Select the Extron HDMI -2 (4- HD Audio Driver for Display Audio) as the speaker or audio playback source in the lectern computer and its Zoom, UICapture (Panopto), or Skype applications.

1. Select Blu-Ray as the display input or source on the A/V control panel interface.
2. Press the eject or open/close button on the Blu-Ray media player disc tray or the A/V control panel interface to load a disc.
3. The Blu-Ray media player may be controlled with the A/V control panel interface or by remote control, which is typically near the Blu-Ray media player or in the A/V rack drawer.

If you can't produce in-room video and audio from Blu-Ray media player with the A/V system on and not muted and Blu-Ray selected:

1. Increase the A/V control panel interface audio.
2. Toggle the projector front mute button and the projector rear mute button on the A/V control panel interface.
3. Toggle the mute button on the Blu-Ray remote if available.
4. Restart the A/V system.
5. If the disc is a DVD, you may attempt to play it through the lectern computer's DVD drive.

This learning space is equipped with a document camera.

1. Select doc cam as the display input or source on the A/V control panel interface.
2. The document camera should automatically power on.

If the document camera can't be projected with the A/V system on and not muted and doc cam selected on the A/V control panel interface:

1. Check that the document camera has power.
2. Check that the output cables are connected.
3. Toggle the projector front mute button and the projector rear mute button on the A/V control panel interface.
4. Restart the A/V system.

This learning space is equipped with an HDMI cable to display HDMI-capable devices.

1. To display an HDMI-capable personal device, connect the HDMI cable on the media lectern to the personal device's HDMI-port.
2. Select HDMI as the display input or source on the A/V control panel interface.
3. Not all HDMI adapters work with every device and the A/V system. We recommend testing the HDMI connection in advance.

If you can't produce in-room video or audio through HDMI with the A/V system on and not muted and HDMI selected:

1. Increase the A/V control panel audio level.
2. Toggle the projector front mute button and projector rear mute button on the control panel interface.
3. Restart the A/V system.

This learning space is equipped with an accessible media lectern with adjustable height capability.

This learning space is equipped with accessible XLR audio input/output capability.